Difference between revisions of "Resists at QNF"

From Quattrone Nanofabrication Facility
Jump to navigation Jump to search
 
(74 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
The QNF provides a variety of standard resists to meet demands for most applications. Some specialty resists are also sold through the QNF Stockroom. A summary of stocked resists along with some processing information can be found in the table below. Other similar options that may be available in QNF are also listed.
+
The QNF provides a variety of standard resists to meet demands for most applications. Some specialty resists are also sold through the QNF Stockroom. A summary of stocked resists along with some processing information can be found in the table below. Click on the resist name to access the datasheet. Other similar options that may be available in QNF are also listed.
  
 
=== QNF Supplied Standard Photoresists ===
 
=== QNF Supplied Standard Photoresists ===
 
{| class="wikitable sortable"
 
{| class="wikitable sortable"
−
! Resist !! Tone !! Notes !! Alternatives !! Datasheet
+
! Name / Datasheet !! Tone, Thickness !! Wavelength Sensitivity !! Uses !! Tool Compatibility !! Developer !! Remover !! Alternative Resists
 
|-
 
|-
−
| S1805 || + || General || KL5305 || [https://upenn.box.com/s/1ixn9uek8d78y16x3auicmso433glmvv Datasheet]
+
| [https://amolf.nl/wp-content/uploads/2016/09/datasheets_S1800.pdf S1805] || positive,<br> 0.5-1um || g-line & broadband || General || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], [[Heidelberg DWL 66+ Laser Writer | LW-01]],<br> [[ CEE Apogee Spinner | SPN-01]], [[ CEE Apogee Spinner | SPN-03]] || TMAH || NMP || KL5305
 
|-
 
|-
−
| S1813 || + || General || KL5315 || [https://upenn.box.com/s/1ixn9uek8d78y16x3auicmso433glmvv Datasheet]
+
| [https://amolf.nl/wp-content/uploads/2016/09/datasheets_S1800.pdf S1813] || positive,<br> 1-2um || g-line & broadband || General || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], [[Heidelberg DWL 66+ Laser Writer | LW-01]],<br> [[ CEE Apogee Spinner | SPN-01]], [[ CEE Apogee Spinner | SPN-03]], [[SUSS MicroTec AS8 AltaSpray | RC-01]] || TMAH || NMP || KL5315
 
|-
 
|-
−
| S1818 || + || General || || [https://upenn.box.com/s/1ixn9uek8d78y16x3auicmso433glmvv Datasheet]
+
| [https://amolf.nl/wp-content/uploads/2016/09/datasheets_S1800.pdf S1818] || positive,<br> 1.7-2.7um || g-line & broadband || General || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], [[Heidelberg DWL 66+ Laser Writer | LW-01]],<br> [[ CEE Apogee Spinner | SPN-01]], [[ CEE Apogee Spinner | SPN-03]] || TMAH || NMP ||
 
|-
 
|-
−
| SPR 220-3|| + || Etch|| KPRO-3, KL6003, AZ3330F || [https://upenn.box.com/s/lpd3ev35603w582la2317tkubb36ylzt Datasheet]
+
| [https://upenn.box.com/s/lpd3ev35603w582la2317tkubb36ylzt SPR 220-3] || positive,<br> 2.5-5um || i-line, g-line & broadband || Etch, Plating || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], <br> [[ CEE Apogee Spinner | SPN-01]], [[ CEE Apogee Spinner | SPN-03]] || TMAH || NMP || KPRO-3, KL6003, AZ3330F
 
|-
 
|-
−
| SPR 220-4.5|| + || Etch|| KPRO-3, KL6003, AZ3330F || [https://upenn.box.com/s/lpd3ev35603w582la2317tkubb36ylzt Datasheet]
+
| [https://upenn.box.com/s/lpd3ev35603w582la2317tkubb36ylzt SPR 220-4.5] || positive,<br> 3.5-8um || i-line, g-line & broadband || Etch, Plating || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], <br> [[ CEE Apogee Spinner | SPN-01]], [[ CEE Apogee Spinner | SPN-03]]|| TMAH || NMP || KPRO-3, KL6003, AZ3330F
 
|-
 
|-
−
| SPR 220-7|| + || Etch|| AZ 12XT, AZ P4620 || [https://upenn.box.com/s/lpd3ev35603w582la2317tkubb36ylzt Datasheet]
+
| [https://upenn.box.com/s/lpd3ev35603w582la2317tkubb36ylzt SPR 220-7] || positive,<br> 6um-12um || i-line, g-line & broadband || Etch, Plating || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], <br> [[ CEE Apogee Spinner | SPN-01]], [[ CEE Apogee Spinner | SPN-03]] || TMAH || NMP || AZ 12XT, AZ P4620
 
|-
 
|-
−
| AZ 3330F|| + || General, Metal RIE, Plating || SPR 220-3, SPR 220-4.5, K-PRO 3, KL60003 || [https://upenn.box.com/s/xb5pfl6zbb1eynl6oyerrub0lw3xh3n7 Datasheet]
+
| [https://upenn.box.com/s/xb5pfl6zbb1eynl6oyerrub0lw3xh3n7 AZ 3330F] || positive,<br> 1-5um || g-line, i-line, h-line & broadband || General, Metal RIE, Plating || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], <br> [[ CEE Apogee Spinner | SPN-01]], [[ CEE Apogee Spinner | SPN-03]] || TMAH or AZ400K 1:4 || || SPR 220-3, SPR 220-4.5, K-PRO 3, KL6003
 
|-
 
|-
−
| NR7-3000P|| - || Etch, General || || [https://upenn.box.com/s/lff7qf7wq9cn1ny8bytf0e8d87ddjit0 Datasheet]
+
| [https://upenn.box.com/s/0r8meepoyq0b1jux7ubudcpt70clau48 AZ P4620] || positive,<br> 6-15um || || Thick Resist, Plating, Packaging || [https://wiki.nano.upenn.edu/wiki/index.php?title=SUSS_MicroTec_MA6_Gen3_Mask_Aligner MA-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Left) SPN-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Right) SPN-03] || TMAH or AZ400K 1:4 || || SPR 220-7, AZ 12XT-20PL-15
 
|-
 
|-
−
| APOL-LO 3202|| - || Liftoff || || [https://upenn.box.com/s/1nocyldqmocrqmz1gjcwry8n86m9khtu Datasheet]
+
| [https://upenn.box.com/s/v0hwe0p0u3la1oodz3g45qjw0yl54z7f K-PRO 3] || positive,<br> 2-5um || || Plating, Etching || [https://wiki.nano.upenn.edu/wiki/index.php?title=SUSS_MicroTec_MA6_Gen3_Mask_Aligner MA-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Left) SPN-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Right) SPN-03] || TMAH or AZ400K 1:4 || NMP || SPR 220-3, SPR 220-4.5
 
|-
 
|-
−
| IP-Dip|| - || Nanoscribe|| ||  
+
| [https://upenn.box.com/s/lff7qf7wq9cn1ny8bytf0e8d87ddjit0 NR7-3000P] || negative,<br> 2-5um || i-line || Etch, General || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], <br> [[ CEE Apogee Spinner | SPN-01]], [[ CEE Apogee Spinner | SPN-03]], SPN-04 || TMAH || ||  
 
|-
 
|-
−
| HARE SQ 2|| - || Epoxy || SU-8 2005 || [https://upenn.box.com/s/4ilkowm17lowx3aod1pt8fwcrf1a8wvc Datasheet]
+
| [https://upenn.box.com/s/1nocyldqmocrqmz1gjcwry8n86m9khtu APOL-LO 3202] || negative,<br> 2-4um || i-line & broadband || Liftoff || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], <br> [[ CEE Apogee Spinner | SPN-01]], [[ CEE Apogee Spinner | SPN-03]], SPN-04, [[SUSS MicroTec AS8 AltaSpray | RC-01]] || TMAH || NMP ||
 
|-
 
|-
−
| HARE SQ 50|| - || Epoxy || SU-8 2050 || [https://upenn.box.com/s/4ilkowm17lowx3aod1pt8fwcrf1a8wvc Datasheet]
+
| [https://upenn.box.com/s/4ilkowm17lowx3aod1pt8fwcrf1a8wvc HARE SQ 2] || negative,<br> 2um-5um || i-line & broadband || Soft Lithography, Epoxy, Insulator || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], [[ABM3000HR Mask Aligner | MA-03]], <br> SPN-04, [[ CEE Apogee Spinner | SPN-08]] || PGMEA, IPA || N/A || SU-8 2005
 +
|-
 +
| [https://upenn.box.com/s/4ilkowm17lowx3aod1pt8fwcrf1a8wvc HARE SQ 50] || negative,<br> 25um-100um || i-line & broadband || Soft Lithography, Epoxy, Insulator || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], [[ABM3000HR Mask Aligner | MA-03]], <br> SPN-04, [[ CEE Apogee Spinner | SPN-08]] || PGMEA, IPA || N/A || SU-8 2050
 +
|-
 +
| IP-Dip || negative,<br> N/A || 2PP || Small Features || [[Nanoscribe Photonic Professional GT | LW-02]] || PGMEA, IPA || N/A || IP-L
 +
|-
 +
| IP-S || negative,<br> N/A || 2PP || Medium Features || [[Nanoscribe Photonic Professional GT | LW-02]] || PGMEA, IPA || N/A || IP-L
 +
|-
 +
| IP-Q || negative,<br> N/A || 2PP || Large Features || [[Nanoscribe Photonic Professional GT | LW-02]] || PGMEA, IPA || N/A ||
 +
|}
 +
 
 +
=== Stockroom Photoresists ===
 +
{| class="wikitable sortable"
 +
! Name / Datasheet !! Tone, Thickness !! Wavelength Sensitivity !! Uses !! Tool Compatibility !! Developer !! Remover !! Alternative Resists
 +
|-
 +
| [https://upenn.box.com/s/f9oi75p3p84rdtpqq5unp0j1c3mqxjrd SU-8 3050] || negative,<br> 40um-100um || i-line & broadband || Soft Lithography, Epoxy, Insulator || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], [[ABM3000HR Mask Aligner | MA-03]], <br> SPN-04, [[ CEE Apogee Spinner | SPN-08]] || PGMEA || N/A || HARE SQ 50
 +
|-
 +
| HARE SQ 5 || negative,<br> 4um-10um || i-line & broadband || Soft Lithography, Epoxy, Insulator || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], [[ABM3000HR Mask Aligner | MA-03]], <br> SPN-04, [[ CEE Apogee Spinner | SPN-08]] || PGMEA || N/A ||
 +
|-
 +
| HARE SQ 10 || negative,<br> 7-20um || i-line & broadband || Epoxy, 40um-170um || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], [[ABM3000HR Mask Aligner | MA-03]], <br> SPN-04, [[ CEE Apogee Spinner | SPN-08]] || PGMEA || N/A ||
 +
|-
 +
| HARE SQ 25 || negative,<br> 12um-50um || i-line & broadband || Soft Lithography, Epoxy, Insulator || [[SUSS MicroTec MA6 Gen3 Mask Aligner | MA-01]], [[ABM3000HR Mask Aligner | MA-03]], <br> SPN-04, [[ CEE Apogee Spinner | SPN-08]] || PGMEA || N/A ||
 +
|}
 +
 
 +
=== Standard e-beam Resists ===
 +
{| class="wikitable sortable"
 +
! Name / Datasheet !! Tone, Thickness !! Uses !! Tool Compatibility !! Developer !! Remover !! Alternative Resists
 +
|-
 +
| [https://upenn.box.com/s/ff9s9dhl52tqagc0vbtflwf64odcwtw7 495 PMMA A8] || positive,<br> 0.5-1um ||  Lower Resolution|| [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-03], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_E-Beam_Resist SPN-06] || 3:1 IPA/H2O || NMP ||
 +
|-
 +
| [https://upenn.box.com/s/ff9s9dhl52tqagc0vbtflwf64odcwtw7 495 PMMA A4] || positive,<br> 180nm-300nm  || Lower Resolution || [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-03], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_E-Beam_Resist SPN-06] || 3:1 IPA/H2O || NMP ||
 +
|-
 +
| [https://upenn.box.com/s/ff9s9dhl52tqagc0vbtflwf64odcwtw7 495 PMMA A2] || positive,<br> 50nm-100nm  || Lower Resolution || [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-03], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_E-Beam_Resist SPN-06] || 3:1 IPA/H2O || NMP ||
 +
|-
 +
| [https://upenn.box.com/s/ff9s9dhl52tqagc0vbtflwf64odcwtw7 950 PMMA A4] || positive,<br> 200nm-400nm  || High Resolution || [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-03], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_E-Beam_Resist SPN-06] || 3:1 IPA/H2O || NMP ||
 +
|-
 +
| [https://upenn.box.com/s/ff9s9dhl52tqagc0vbtflwf64odcwtw7 950 PMMA A2] || positive,<br> 50nm-100nm  || High Resolution || [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-03], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_E-Beam_Resist SPN-06] || 3:1 IPA/H2O || NMP || 1000 HARP 0.1
 +
|-
 +
| [https://upenn.box.com/s/re1sz5cil83m99yv3ug2p9p8ghk3a3vm 1000 HARP 1.3] || positive,<br> || High Resolution|| [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-03], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_E-Beam_Resist SPN-06] || 3:1 IPA/H2O || NMP ||
 +
|-
 +
| [https://upenn.box.com/s/re1sz5cil83m99yv3ug2p9p8ghk3a3vm 1000 HARP 0.1] || positive,<br> || High Resolution || [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-03], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_E-Beam_Resist SPN-06] || 3:1 IPA/H2O || NMP || 950 PMMA A2
 +
|}
 +
 
 +
=== Stockroom e-beam Resists ===
 +
{| class="wikitable sortable"
 +
! Name / Datasheet !! Tone, Thickness !! Uses !! Tool Compatibility !! Developer !! Remover
 +
|-
 +
| [https://upenn.box.com/s/7ek7ccxq3c8xsp8jhe2lhdoi1e0keamt ZEP 520A] || positive,<br> || Thicker formulation || [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-03], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_E-Beam_Resist SPN-06] || Xylenes or Amyl acetate || NMP
 +
|-
 +
| [https://upenn.box.com/s/7ek7ccxq3c8xsp8jhe2lhdoi1e0keamt ZEP 520A-7] || positive,<br> || Thinner formulation ||  [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-03], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_E-Beam_Resist SPN-06] || Xylenes or Amyl acetate || NMP
 +
|-
 +
| [https://upenn.box.com/s/bv53alommdr2en6s6byrlm4psxdjohzp H-SiQ 6%] || negative,<br> || HSQ Equivalent || [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-03], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_E-Beam_Resist SPN-06] || TMAH ||
 +
|}
 +
 
 +
=== Other Resists ===
 +
{| class="wikitable sortable"
 +
! Name / Datasheet !! Tone, Thickness !! Uses !! Tool Compatibility !! Developer !! Remover
 +
|-
 +
| [https://upenn.box.com/s/ugfgv8xix7vda56ddaodqv3za44m6syk LOR 3A] || N/A,<br> 200-400nm || Liftoff, Non-imaging - Mid-Resolution || <strong> [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Right) SPN-03], SPN-04 only! </strong> <br> Precipitates in acetone, PGMEA || TMAH || NMP
 +
|-
 +
| [https://upenn.box.com/s/ugfgv8xix7vda56ddaodqv3za44m6syk LOR 5C] || N/A,<br> 300-750nm || Liftoff, Non-imaging - Lower Resolution/Fast Undercut Rate || <strong> [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Right) SPN-03], SPN-04 only! </strong> <br> Precipitates in acetone, PGMEA || TMAH || NMP
 +
|-
 +
| [https://upenn.box.com/s/ugfgv8xix7vda56ddaodqv3za44m6syk PMGI SF 5S] || N/A,<br> || Liftoff, Non-imaging - Higher Resolution/Slow Undercut Rate || <strong> [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Right) SPN-03], SPN-04 only! </strong> <br> Precipitates in acetone, PGMEA  || TMAH || NMP
 +
|-
 +
| [https://upenn.box.com/s/ugfgv8xix7vda56ddaodqv3za44m6syk PMGI SF 2S] || N/A,<br> || Liftoff, Non-imaging - Higher Resolution/Slow Undercut Rate || <strong> [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Right) SPN-03], SPN-04 only! </strong> <br> Precipitates in acetone, PGMEA  || TMAH || NMP
 +
|-
 +
| [https://upenn.box.com/s/wmal2jasuw6m9nqjykz6p8i2ijdn61fm NXR-1025] || N/A,<br> || Nanoimprint || [https://wiki.nano.upenn.edu/wiki/index.php?title=Nanonex_NX2600_Nanoimprint MA-02] ||
 +
|}
 +
 
 +
=== Miscellaneous ===
 +
These may be available but are not guaranteed to be stocked
 +
 
 +
{| class="wikitable sortable"
 +
! Name / Datasheet !! Tone, Thickness !! Uses !! Tool Compatibility !! Developer !! Remover !! Alternative Resists
 +
|-
 +
| [https://upenn.box.com/s/1ixn9uek8d78y16x3auicmso433glmvv KL5305] || positive,<br> 0.5-1um || General || [https://wiki.nano.upenn.edu/wiki/index.php?title=SUSS_MicroTec_MA6_Gen3_Mask_Aligner MA-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Left) SPN-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Right) SPN-03] || TMAH || NMP || S1805
 +
|-
 +
| [https://upenn.box.com/s/1ixn9uek8d78y16x3auicmso433glmvv KL5315] || positive,<br> 1-2.5um || General || [https://wiki.nano.upenn.edu/wiki/index.php?title=SUSS_MicroTec_MA6_Gen3_Mask_Aligner MA-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Left) SPN-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Right) SPN-03] || TMAH || NMP || S1813
 +
|-
 +
| [https://upenn.box.com/s/qv98tqy0ark0l7ppmvphdicgs7udst1f KL6003] || positive,<br> 2-5um ||  || [https://wiki.nano.upenn.edu/wiki/index.php?title=SUSS_MicroTec_MA6_Gen3_Mask_Aligner MA-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Left) SPN-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Right) SPN-03] || TMAH || NMP || SPR 220-3, SPR 220-4.5
 +
|-
 +
| [https://upenn.box.com/s/dj5l9rrsg0k8g8opdegrylhkgypev9w9 AZ 12XT-20PL-15] || positive,<br> 10um-25um || CAR (i-line), Plating, Packaging, Deep Etch  || [https://wiki.nano.upenn.edu/wiki/index.php?title=SUSS_MicroTec_MA6_Gen3_Mask_Aligner MA-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Left) SPN-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_Positive_Resist_(Right) SPN-03] || TMAH || || SPR 220-7, AZ P4620
 +
|-
 +
| [https://upenn.box.com/s/7ywdt8x3fqda3p21l4es7fyd98s0fbep ma-N 2403] || negative,<br> 250-500nm ||  || [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-01], [https://wiki.nano.upenn.edu/wiki/index.php?title=Elionix_ELS-7500EX_E-Beam_Lithography_System EBL-03], [https://wiki.nano.upenn.edu/wiki/index.php?title=Apogee_Spinner_-_E-Beam_Resist SPN-06] || || ||
 
|}
 
|}

Latest revision as of 12:14, 16 January 2025

The QNF provides a variety of standard resists to meet demands for most applications. Some specialty resists are also sold through the QNF Stockroom. A summary of stocked resists along with some processing information can be found in the table below. Click on the resist name to access the datasheet. Other similar options that may be available in QNF are also listed.

QNF Supplied Standard Photoresists

Name / Datasheet Tone, Thickness Wavelength Sensitivity Uses Tool Compatibility Developer Remover Alternative Resists
S1805 positive,
0.5-1um		 g-line & broadband General MA-01, LW-01,
SPN-01, SPN-03		 TMAH NMP KL5305
S1813 positive,
1-2um		 g-line & broadband General MA-01, LW-01,
SPN-01, SPN-03, RC-01		 TMAH NMP KL5315
S1818 positive,
1.7-2.7um		 g-line & broadband General MA-01, LW-01,
SPN-01, SPN-03		 TMAH NMP
SPR 220-3 positive,
2.5-5um		 i-line, g-line & broadband Etch, Plating MA-01,
SPN-01, SPN-03		 TMAH NMP KPRO-3, KL6003, AZ3330F
SPR 220-4.5 positive,
3.5-8um		 i-line, g-line & broadband Etch, Plating MA-01,
SPN-01, SPN-03		 TMAH NMP KPRO-3, KL6003, AZ3330F
SPR 220-7 positive,
6um-12um		 i-line, g-line & broadband Etch, Plating MA-01,
SPN-01, SPN-03		 TMAH NMP AZ 12XT, AZ P4620
AZ 3330F positive,
1-5um		 g-line, i-line, h-line & broadband General, Metal RIE, Plating MA-01,
SPN-01, SPN-03		 TMAH or AZ400K 1:4 SPR 220-3, SPR 220-4.5, K-PRO 3, KL6003
AZ P4620 positive,
6-15um		 Thick Resist, Plating, Packaging MA-01, SPN-01, SPN-03 TMAH or AZ400K 1:4 SPR 220-7, AZ 12XT-20PL-15
K-PRO 3 positive,
2-5um		 Plating, Etching MA-01, SPN-01, SPN-03 TMAH or AZ400K 1:4 NMP SPR 220-3, SPR 220-4.5
NR7-3000P negative,
2-5um		 i-line Etch, General MA-01,
SPN-01, SPN-03, SPN-04		 TMAH
APOL-LO 3202 negative,
2-4um		 i-line & broadband Liftoff MA-01,
SPN-01, SPN-03, SPN-04, RC-01		 TMAH NMP
HARE SQ 2 negative,
2um-5um		 i-line & broadband Soft Lithography, Epoxy, Insulator MA-01, MA-03,
SPN-04, SPN-08		 PGMEA, IPA N/A SU-8 2005
HARE SQ 50 negative,
25um-100um		 i-line & broadband Soft Lithography, Epoxy, Insulator MA-01, MA-03,
SPN-04, SPN-08		 PGMEA, IPA N/A SU-8 2050
IP-Dip negative,
N/A		 2PP Small Features LW-02 PGMEA, IPA N/A IP-L
IP-S negative,
N/A		 2PP Medium Features LW-02 PGMEA, IPA N/A IP-L
IP-Q negative,
N/A		 2PP Large Features LW-02 PGMEA, IPA N/A

Stockroom Photoresists

Name / Datasheet Tone, Thickness Wavelength Sensitivity Uses Tool Compatibility Developer Remover Alternative Resists
SU-8 3050 negative,
40um-100um		 i-line & broadband Soft Lithography, Epoxy, Insulator MA-01, MA-03,
SPN-04, SPN-08		 PGMEA N/A HARE SQ 50
HARE SQ 5 negative,
4um-10um		 i-line & broadband Soft Lithography, Epoxy, Insulator MA-01, MA-03,
SPN-04, SPN-08		 PGMEA N/A
HARE SQ 10 negative,
7-20um		 i-line & broadband Epoxy, 40um-170um MA-01, MA-03,
SPN-04, SPN-08		 PGMEA N/A
HARE SQ 25 negative,
12um-50um		 i-line & broadband Soft Lithography, Epoxy, Insulator MA-01, MA-03,
SPN-04, SPN-08		 PGMEA N/A

Standard e-beam Resists

Name / Datasheet Tone, Thickness Uses Tool Compatibility Developer Remover Alternative Resists
495 PMMA A8 positive,
0.5-1um		 Lower Resolution EBL-01, EBL-03, SPN-06 3:1 IPA/H2O NMP
495 PMMA A4 positive,
180nm-300nm		 Lower Resolution EBL-01, EBL-03, SPN-06 3:1 IPA/H2O NMP
495 PMMA A2 positive,
50nm-100nm		 Lower Resolution EBL-01, EBL-03, SPN-06 3:1 IPA/H2O NMP
950 PMMA A4 positive,
200nm-400nm		 High Resolution EBL-01, EBL-03, SPN-06 3:1 IPA/H2O NMP
950 PMMA A2 positive,
50nm-100nm		 High Resolution EBL-01, EBL-03, SPN-06 3:1 IPA/H2O NMP 1000 HARP 0.1
1000 HARP 1.3 positive,
 High Resolution EBL-01, EBL-03, SPN-06 3:1 IPA/H2O NMP
1000 HARP 0.1 positive,
 High Resolution EBL-01, EBL-03, SPN-06 3:1 IPA/H2O NMP 950 PMMA A2

Stockroom e-beam Resists

Name / Datasheet Tone, Thickness Uses Tool Compatibility Developer Remover
ZEP 520A positive,
 Thicker formulation EBL-01, EBL-03, SPN-06 Xylenes or Amyl acetate NMP
ZEP 520A-7 positive,
 Thinner formulation EBL-01, EBL-03, SPN-06 Xylenes or Amyl acetate NMP
H-SiQ 6% negative,
 HSQ Equivalent EBL-01, EBL-03, SPN-06 TMAH

Other Resists

Name / Datasheet Tone, Thickness Uses Tool Compatibility Developer Remover
LOR 3A N/A,
200-400nm		 Liftoff, Non-imaging - Mid-Resolution SPN-03, SPN-04 only!
Precipitates in acetone, PGMEA		 TMAH NMP
LOR 5C N/A,
300-750nm		 Liftoff, Non-imaging - Lower Resolution/Fast Undercut Rate SPN-03, SPN-04 only!
Precipitates in acetone, PGMEA		 TMAH NMP
PMGI SF 5S N/A,
 Liftoff, Non-imaging - Higher Resolution/Slow Undercut Rate SPN-03, SPN-04 only!
Precipitates in acetone, PGMEA		 TMAH NMP
PMGI SF 2S N/A,
 Liftoff, Non-imaging - Higher Resolution/Slow Undercut Rate SPN-03, SPN-04 only!
Precipitates in acetone, PGMEA		 TMAH NMP
NXR-1025 N/A,
 Nanoimprint MA-02

Miscellaneous

These may be available but are not guaranteed to be stocked

Name / Datasheet Tone, Thickness Uses Tool Compatibility Developer Remover Alternative Resists
KL5305 positive,
0.5-1um		 General MA-01, SPN-01, SPN-03 TMAH NMP S1805
KL5315 positive,
1-2.5um		 General MA-01, SPN-01, SPN-03 TMAH NMP S1813
KL6003 positive,
2-5um		 MA-01, SPN-01, SPN-03 TMAH NMP SPR 220-3, SPR 220-4.5
AZ 12XT-20PL-15 positive,
10um-25um		 CAR (i-line), Plating, Packaging, Deep Etch MA-01, SPN-01, SPN-03 TMAH SPR 220-7, AZ P4620
ma-N 2403 negative,
250-500nm		 EBL-01, EBL-03, SPN-06
Retrieved from "https://wiki.nano.upenn.edu/wiki/index.php?title=Resists_at_QNF&oldid=2197"