Difference between revisions of "Lesker PVD75 E-beam Evaporator"
Jump to navigation
Jump to search
| Line 12: | Line 12: | ||
| Tool_Model = PVD75 | | Tool_Model = PVD75 | ||
| Iris_Designation = PVD-04 | | Iris_Designation = PVD-04 | ||
| − | | Lab_Phone = | + | | Lab_Phone = 215-898-9748 |
| SOP Link = [https://www.seas.upenn.edu/~nanosop/PVD75_e-beam_SOP.htm SOP] | | SOP Link = [https://www.seas.upenn.edu/~nanosop/PVD75_e-beam_SOP.htm SOP] | ||
}} | }} | ||
Revision as of 12:56, 23 December 2022
 |
|
| Tool Name | Lesker PVD75 E-Beam/Thermal Evaporator |
|---|---|
| Instrument Type | Physical vapor deposition |
| Staff Manager | Jason (jarohr@seas.upenn.edu) |
| Lab Location | Bay 2 |
| Tool Manufacturer | Kurt J. Lesker |
| Tool Model | PVD75 |
| NEMO Designation | {{{NEMO_Designation}}} |
| Lab Phone | 215-898-9748 |
| SOP Link | SOP |
Description
The tool
The Kurt J. Lesker PVD75 E-beam Evaporator is an electron-beam (e-beam) evaporation tool. The tool is a fully automated system for depositing Ti, Cr, Au, and/or Pd. The tool also comes with a load-lock, allowing for fast and easy transfer of samples in and out of the system. While less flexible than the PVD-02 deposition system in terms of available materials, the PVD-04 is a much faster tool.
Available materials
The tool contains the following materials:
- Au - Gold
- Cr - Chromium
- Pd - Palladium
- Ti - Titanium
Deposition is limited to thin-film thicknesses of ~100 nm.
Resources
Training video
Link: PVD-4 Training Video
SOPs & Troubleshooting
Link: QNF SOP