Difference between revisions of "Elionix ELS-7500EX E-Beam Lithography System"
Jump to navigation
Jump to search
m |
|||
| Line 1: | Line 1: | ||
| − | [[Category:Lithography]] | + | [[Category:Lithography]][[Category:E-Beam Lithography]][[Category:Equipment]] |
{{EquipmentInfo | {{EquipmentInfo | ||
Latest revision as of 12:29, 28 July 2025
 |
|
| Tool Name | Elionix ELS-7500EX E-Beam Lithography System |
|---|---|
| Instrument Type | Lithography |
| Staff Manager | David Barth |
| Lab Location | Bay 4 |
| Tool Manufacturer | Elionix |
| Tool Model | ELS-7500EX |
| NEMO Designation | EBL-01 |
| Nearest Phone | 8-9799 |
| SOP Link | SOP |
Description
The Elionix ELS-7500EX is an electron beam lithography tool capable of high resolution patterning at 50 kV with currents from 10 pA to 20 nA.
Applications
- Patterning of positive and negative e-beam resists with features from ~10 nm to micron scale
Allowed Materials
- Standard semiconductor materials
- Low vapor pressure metals
- Resists
Resources
SOPs & Troubleshooting
- SOP
- March 4, 2022: There is a minor issue with the vacuum in the loadlock. The loadlock will not pump down from a partially evacuated state. In order to pump the loadlock if it was not already vented, you must first vent it, and then pump it down again.
Resist and Process Data
- PMMA A2 and A4 Spin Curves
- PMMA A2 Contrast Curves
- CSAR-62 Contrast Curves
- ZEP Contrast Curves
- DisCharge Spin-on Anticharging Agent
- Cold Development for PMMA and ZEP
- IPA:H2O for High Contrast Development of PMMA
- Dose Time Calculator for Elionix ELS-7500EX