Difference between revisions of "QNF Equipment Owner Matrix"

From Quattrone Nanofabrication Facility
Jump to navigation Jump to search
(Updating to current responsibilities, removing David Jones, Jason Rohr)
 
(9 intermediate revisions by 2 users not shown)
Line 8: Line 8:
 
| K&S Wire Bonder || BE-03 || Backend || [[Eric_Johnston | Eric Johnston]]
 
| K&S Wire Bonder || BE-03 || Backend || [[Eric_Johnston | Eric Johnston]]
 
|-
 
|-
−
| ADT 7100 Dicing Saw || BE-04 || Backend || [[Eric_Johnston | Eric Johnston]]
+
| ADT 7100 Dicing Saw || BE-04 || Backend || [[Travis Venables | Travis Venables]]
 
|-
 
|-
−
| MPT Corp. RTP-600S Rapid Thermal Annealer || BE-05 || Backend || [[David_Barth | David Barth]]
+
| TPT Wire Bonder || BE-06 || Backend || [[Eric_Johnston | Eric Johnston]]
 
|-
 
|-
−
| Tousimis Critical Point Dryer || CPD-01 || Backend || [[Kyle_Keenan | Kyle Keenan]]
+
| Brewer Spinner (White Light) || SPN-07 || Backend || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
 
| Cambridge Nanotech S200 ALD || ALD-01 || Deposition || [[Sam Azadi | Sam Azadi]]
 
| Cambridge Nanotech S200 ALD || ALD-01 || Deposition || [[Sam Azadi | Sam Azadi]]
−
|-
 
−
| Ultratech Fiji G2 ALD || ALD-02 || Deposition || Faculty Managed
 
 
|-
 
|-
 
| Veeco Savannah 200 || ALD-03 || Deposition || [[Sam Azadi | Sam Azadi]]
 
| Veeco Savannah 200 || ALD-03 || Deposition || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
 
| Oxford PlasmaLab 100 PECVD || CVD-01 || Deposition || [[Sam Azadi | Sam Azadi]]
 
| Oxford PlasmaLab 100 PECVD || CVD-01 || Deposition || [[Sam Azadi | Sam Azadi]]
−
|-
 
−
| MRL Wet/Dry Thermal Oxide || CVD-02 A || Deposition || [[Sam Azadi | Sam Azadi]]
 
−
|-
 
−
| MRL LPCVD Silicon Nitride || CVD-02 B || Deposition || [[Sam Azadi | Sam Azadi]]
 
−
|-
 
−
| MRL Anneal 1 || CVD-02 C || Deposition || [[Sam Azadi | Sam Azadi]]
 
−
|-
 
−
| MRL Anneal 2 || CVD-02 D || Deposition || [[Sam Azadi | Sam Azadi]]
 
 
|-
 
|-
 
| SMI MOCVD, Horizontal Reactor || CVD-04 H || Deposition || Faculty Managed
 
| SMI MOCVD, Horizontal Reactor || CVD-04 H || Deposition || Faculty Managed
Line 38: Line 28:
 
| Lesker PVD75 E-Beam/Thermal Evaporator || PVD-02 || Deposition || [[David_Barth | David Barth]]
 
| Lesker PVD75 E-Beam/Thermal Evaporator || PVD-02 || Deposition || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Lesker PVD75 DC/RF Sputterer || PVD-03 || Deposition || [[David_Barth | David Barth]]
+
| Lesker PVD75 DC/RF Sputterer || PVD-03 || Deposition || [[Dan Sabrsula | Dan Sabrsula]]
 
|-
 
|-
−
| Lesker PVD75 E-beam Evaporator || PVD-04 || Deposition || [[David_Barth | David Barth]]
+
| Lesker PVD75 E-beam Evaporator || PVD-04 || Deposition || [[Dan Sabrsula | Dan Sabrsula]]
 
|-
 
|-
−
| Denton Explorer14 Magnetron Sputterer || PVD-05 || Deposition || [[Sam Azadi | Sam Azadi]]
+
| Denton Explorer14 Magnetron Sputterer || PVD-05 || Deposition || [[Dan Sabrsula | Dan Sabrsula]]
 
|-
 
|-
 
| Evatec Clusterline 200 II || PVD-06 || Deposition || Faculty Managed
 
| Evatec Clusterline 200 II || PVD-06 || Deposition || Faculty Managed
 
|-
 
|-
−
| Anatech SCE-108 Barrel Asher || DE-02 || Dry Etch || [[Kyle Keenan | Kyle Keenan]]
+
| Intlvac E-beam Evaporator || PVD-09 || Deposition || [[Dan Sabrsula | Dan Sabrsula]]
 
|-
 
|-
−
| SPTS Si DRIE || DE-03 || Dry Etch || [[Sam Azadi | Sam Azadi]]
+
| Intlvac IBE Ion Mill || DE-01 || Dry Etch || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Oxford 80 Plus RIE || DE-04 || Dry Etch || [[Sam Azadi | Sam Azadi]]
+
| Anatech SCE-108 Barrel Asher || DE-02 || Dry Etch || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| Oxford Cobra ICP Etcher || DE-05 || Dry Etch || [[Sam Azadi | Sam Azadi]]
+
| SPTS Si DRIE || DE-03 || Dry Etch || [[Lucas Barreto | Lucas Barreto]]
 
|-
 
|-
−
| SPTS/Xactix XeF2 Isotropic Etcher || DE-06 || Dry Etch || [[Sam Azadi | Sam Azadi]]
+
| Oxford 80 Plus RIE || DE-04 || Dry Etch || [[Lucas Barreto | Lucas Barreto]]
 
|-
 
|-
−
| Jupiter II RIE Plasma Etcher || DE-08 || Dry Etch || [[Sam Azadi | Sam Azadi]]
+
| Oxford Cobra ICP Etcher || DE-05 || Dry Etch || [[Lucas Barreto | Lucas Barreto]]
 
|-
 
|-
−
| Zeiss Smartzoom5 2D/3D Optical Microscope || MET-10 || Inspection || [[Eric_Johnston | Eric Johnston]]
+
| SPTS/Xactix XeF2 Isotropic Etcher || DE-06 || Dry Etch || [[Lucas Barreto | Lucas Barreto]]
 +
|-
 +
| Jupiter II RIE Plasma Etcher || DE-08 || Dry Etch || [[Lucas Barreto | Lucas Barreto]]
 +
|-
 +
| Zeiss Smartzoom5 2D/3D Optical Microscope || MET-10 || Inspection || [[David_Barth | David Barth]]
 
|-
 
|-
 
| Zeiss Axio Imager M2m Microscope (1 of 4) || MET-12 || Inspection || [[Kyle Keenan | Kyle Keenan]]
 
| Zeiss Axio Imager M2m Microscope (1 of 4) || MET-12 || Inspection || [[Kyle Keenan | Kyle Keenan]]
Line 70: Line 64:
 
| IPG IX-255 Excimer Laser Micromachining || LMM-01 || Laser Micromachining || [[Eric_Johnston | Eric Johnston]]
 
| IPG IX-255 Excimer Laser Micromachining || LMM-01 || Laser Micromachining || [[Eric_Johnston | Eric Johnston]]
 
|-
 
|-
−
| IPG IX280-DXF Green Laser Micromachining || LMM-02 || Laser Micromachining || [[Ana Cohen | Ana Cohen]]
+
| IPG IX280-DXF Green Laser Micromachining || LMM-02 || Laser Micromachining || [[Eric_Johnston | Eric Johnston]]
 
|-
 
|-
 
| Elionix ELS-7500EX E-Beam Lithography System || EBL-01 || Lithography || [[David_Barth | David Barth]]
 
| Elionix ELS-7500EX E-Beam Lithography System || EBL-01 || Lithography || [[David_Barth | David Barth]]
 
|-
 
|-
 
| Litho Workstation for BEAMER and TRACER || EBL-02 || Lithography || [[David_Barth | David Barth]]
 
| Litho Workstation for BEAMER and TRACER || EBL-02 || Lithography || [[David_Barth | David Barth]]
 +
|-
 +
| Raith EBPG5200+ E-Beam Lithography System || EBL-03 || Lithography || [[David_Barth | David Barth]]
 
|-
 
|-
 
| Heidelberg DWL 66+ Laser Writer || LW-01 || Lithography || [[Ana Cohen | Ana Cohen]]
 
| Heidelberg DWL 66+ Laser Writer || LW-01 || Lithography || [[Ana Cohen | Ana Cohen]]
Line 85: Line 81:
 
|-
 
|-
 
| Hawks/Genesis HMDS Vapor Prime Oven || OVN-01 || Lithography || [[Kyle Keenan | Kyle Keenan]]
 
| Hawks/Genesis HMDS Vapor Prime Oven || OVN-01 || Lithography || [[Kyle Keenan | Kyle Keenan]]
−
|-
 
−
| SUSS MicroTec AS8 AltaSpray || RC-01 || Lithography || [[Ana Cohen | Ana Cohen]]
 
 
|-
 
|-
 
| KLA Tencor P7 2D profilometer || MET-01 || Metrology || [[David_Barth | David Barth]]
 
| KLA Tencor P7 2D profilometer || MET-01 || Metrology || [[David_Barth | David Barth]]
Line 98: Line 92:
 
| Filmetrics Profilm3D Optical Profilometer || MET-05 || Metrology || [[David_Barth | David Barth]]
 
| Filmetrics Profilm3D Optical Profilometer || MET-05 || Metrology || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Woollam V-VASE Ellipsometer || MET-06 || Metrology || [[Eric_Johnston | Eric Johnston]]
+
| Woollam V-VASE Ellipsometer || MET-06 || Metrology || [[Lucas Barreto | Lucas Barreto]]
 
|-
 
|-
−
| Jandel Multi Height Four Point Probe || MET-08 || Metrology || [[Sam Azadi | Sam Azadi]]
+
| Jandel Multi Height Four Point Probe || MET-08 || Metrology || [[Lucas Barreto | Lucas Barreto]]
 
|-
 
|-
−
| Micromanipulator 4060 Probe Station || MET-09 || Metrology || [[David_Barth | David Barth]]
+
| Micromanipulator 4060 Probe Station || MET-09 || Metrology || [[Dan Sabrsula | Dan Sabrsula]]
 
|-
 
|-
−
| Filmetrics F50 (white light) || MET-11 || Metrology || [[David_Barth | David Barth]]
+
| Filmetrics F50 (White Light) || MET-11 || Metrology || [[David_Barth | David Barth]]
 +
|-
 +
| SUSS MicroTec AS8 AltaSpray || RC-01 || Resist Coating || [[Ana Cohen | Ana Cohen]]
 +
|-
 +
| CEE Apogee Spinner - Acetone Soluble Resist || SPN-01 || Resist Coating || [[Ana Cohen | Ana Cohen]]
 +
|-
 +
| CEE Apogee Spinner - LOR/PMGI/Polyimide || SPN-03 || Resist Coating || [[Ana Cohen | Ana Cohen]]
 +
|-
 +
| ReynoldsTech Spinner - Negative Resist || SPN-04 || Resist Coating || [[Ana Cohen | Ana Cohen]]
 +
|-
 +
| Apogee Spinner - E-Beam || SPN-06 || Resist Coating || [[Ana Cohen | Ana Cohen]]
 +
|-
 +
| CEE Apogee Spinner - Negative Epoxy Resist || SPN-08 || Soft Lithography || [[Ana Cohen | Ana Cohen]]
 +
|-
 +
| CEE Apogee Spinner - PDMS || SPN-09 || Soft Lithography || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
 
| Anatech SCE-106 Barrel Asher || DE-07 || Soft Lithography || [[Ana Cohen | Ana Cohen]]
 
| Anatech SCE-106 Barrel Asher || DE-07 || Soft Lithography || [[Ana Cohen | Ana Cohen]]
Line 112: Line 120:
 
| SCS PDS2010 Parylene Coater || PVD-07 || Soft Lithography || [[Kyle_Keenan | Kyle Keenan]]
 
| SCS PDS2010 Parylene Coater || PVD-07 || Soft Lithography || [[Kyle_Keenan | Kyle Keenan]]
 
|-
 
|-
−
| Silanization Dessicator || PVD-08 || Soft Lithography || [[Eric_Johnston | Eric Johnston]]
+
| Silanization Dessicator || PVD-08 || Soft Lithography || [[Ana Cohen | Ana Cohen]]
 +
|-
 +
| MRL Wet/Dry Thermal Oxide || CVD-02 A || Thermal Processing || [[Lucas Barreto | Lucas Barreto]]
 +
|-
 +
| MRL LPCVD Silicon Nitride || CVD-02 B || Thermal Processing || [[Lucas Barreto | Lucas Barreto]]
 +
|-
 +
| MRL Anneal 1 || CVD-02 C || Thermal Processing || [[Lucas Barreto | Lucas Barreto]]
 +
|-
 +
| MRL Anneal 2 || CVD-02 D || Thermal Processing || [[Lucas Barreto | Lucas Barreto]]
 +
|-
 +
| Rapid Thermal Annealer (RTA) - Si || RTA-01 || Thermal Processing || [[Lucas Barreto | Lucas Barreto]]
 
|-
 
|-
−
| Brewer Spinner - SU-8/PDMS || SPN-07 || Soft Lithography || [[Ana Cohen | Ana Cohen]]
+
| Rapid Thermal Annealer (RTA) - General  || RTA-02 || Thermal Processing || [[Lucas Barreto | Lucas Barreto]]
 
|-
 
|-
−
| Apogee Spinner - Positive Resist (Left) - No LOR/PMGI/Polyimide || SPN-01 || Spinners || [[Ana Cohen | Ana Cohen]]
+
| Tousimis Critical Point Dryer || CPD-01 || Wet Processing || [[Travis Venables | Travis Venables]]
 
|-
 
|-
−
| Apogee Spinner - Positive Resist (Right) || SPN-03 || Spinners || [[Ana Cohen | Ana Cohen]]
+
| Spin Rinse Dryer || SRD-01 || Wet Processing || [[Kyle_Keenan | Kyle Keenan]]
 
|-
 
|-
−
| ReynoldsTech Spinner - Negative Resist || SPN-04 || Spinners || [[Ana Cohen | Ana Cohen]]
+
| Hydrofluoric (HF) Acid Bench || WB-06 || Wet Processing || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| Apogee Spinner - E-Beam Resist Only || SPN-06 || Spinners || [[Ana Cohen | Ana Cohen]]
+
| Sonicator - Bay 3 || WB-09 || Wet Processing || [[Kyle_Keenan | Kyle Keenan]]
 
|-
 
|-
−
| Spin Rinse Dryer || SRD-01 || Wet Bench || [[Kyle_Keenan | Kyle Keenan]]
+
| Sonicator - Bay 2 || WB-11 || Wet Processing || [[Kyle_Keenan | Kyle Keenan]]
 
|-
 
|-
−
| Hydrofluoric (HF) Acid Process || WB-06 || Wet Bench || [[Ana Cohen | Ana Cohen]]
+
| RCA Clean Bench || WB-14 || Wet Processing || [[Ana Cohen | Ana Cohen]]
 
|}
 
|}

Latest revision as of 14:10, 31 March 2025

Tool Name Tool ID Tool Group Owner
EVG 510 Wafer Bonder BE-01 Backend Eric Johnston
EVG 620 Wafer Bond Aligner BE-02 Backend Eric Johnston
K&S Wire Bonder BE-03 Backend Eric Johnston
ADT 7100 Dicing Saw BE-04 Backend Travis Venables
TPT Wire Bonder BE-06 Backend Eric Johnston
Brewer Spinner (White Light) SPN-07 Backend Ana Cohen
Cambridge Nanotech S200 ALD ALD-01 Deposition Sam Azadi
Veeco Savannah 200 ALD-03 Deposition Sam Azadi
Oxford PlasmaLab 100 PECVD CVD-01 Deposition Sam Azadi
SMI MOCVD, Horizontal Reactor CVD-04 H Deposition Faculty Managed
SMI MOCVD, Vertical Reactor CVD-04 V Deposition Faculty Managed
Lesker Nano-36 Thermal Evaporator PVD-01 Deposition David Barth
Lesker PVD75 E-Beam/Thermal Evaporator PVD-02 Deposition David Barth
Lesker PVD75 DC/RF Sputterer PVD-03 Deposition Dan Sabrsula
Lesker PVD75 E-beam Evaporator PVD-04 Deposition Dan Sabrsula
Denton Explorer14 Magnetron Sputterer PVD-05 Deposition Dan Sabrsula
Evatec Clusterline 200 II PVD-06 Deposition Faculty Managed
Intlvac E-beam Evaporator PVD-09 Deposition Dan Sabrsula
Intlvac IBE Ion Mill DE-01 Dry Etch David Barth
Anatech SCE-108 Barrel Asher DE-02 Dry Etch Ana Cohen
SPTS Si DRIE DE-03 Dry Etch Lucas Barreto
Oxford 80 Plus RIE DE-04 Dry Etch Lucas Barreto
Oxford Cobra ICP Etcher DE-05 Dry Etch Lucas Barreto
SPTS/Xactix XeF2 Isotropic Etcher DE-06 Dry Etch Lucas Barreto
Jupiter II RIE Plasma Etcher DE-08 Dry Etch Lucas Barreto
Zeiss Smartzoom5 2D/3D Optical Microscope MET-10 Inspection David Barth
Zeiss Axio Imager M2m Microscope (1 of 4) MET-12 Inspection Kyle Keenan
Zeiss Axio Imager M2m Microscope (2 of 4) MET-13 Inspection Kyle Keenan
Zeiss Axio Imager M2m Microscope (3 of 4) MET-14 Inspection Kyle Keenan
Zeiss Axio Imager M2m Microscope (4 of 4) MET-15 Inspection Kyle Keenan
IPG IX-255 Excimer Laser Micromachining LMM-01 Laser Micromachining Eric Johnston
IPG IX280-DXF Green Laser Micromachining LMM-02 Laser Micromachining Eric Johnston
Elionix ELS-7500EX E-Beam Lithography System EBL-01 Lithography David Barth
Litho Workstation for BEAMER and TRACER EBL-02 Lithography David Barth
Raith EBPG5200+ E-Beam Lithography System EBL-03 Lithography David Barth
Heidelberg DWL 66+ Laser Writer LW-01 Lithography Ana Cohen
Nanoscribe Photonic Professional GT LW-02 Lithography Ana Cohen
SUSS MicroTec MA6 Gen3 Mask Aligner MA-01 Lithography Ana Cohen
Nanonex NX2600 Nanoimprint/Mask Aligner MA-02 Lithography David Barth
Hawks/Genesis HMDS Vapor Prime Oven OVN-01 Lithography Kyle Keenan
KLA Tencor P7 2D profilometer MET-01 Metrology David Barth
KLA Tencor P7 2D&3D/stress profilometer MET-02 Metrology David Barth
Filmetrics F50 (yellow light) MET-03 Metrology David Barth
Filmetrics F40 MET-04 Metrology David Barth
Filmetrics Profilm3D Optical Profilometer MET-05 Metrology David Barth
Woollam V-VASE Ellipsometer MET-06 Metrology Lucas Barreto
Jandel Multi Height Four Point Probe MET-08 Metrology Lucas Barreto
Micromanipulator 4060 Probe Station MET-09 Metrology Dan Sabrsula
Filmetrics F50 (White Light) MET-11 Metrology David Barth
SUSS MicroTec AS8 AltaSpray RC-01 Resist Coating Ana Cohen
CEE Apogee Spinner - Acetone Soluble Resist SPN-01 Resist Coating Ana Cohen
CEE Apogee Spinner - LOR/PMGI/Polyimide SPN-03 Resist Coating Ana Cohen
ReynoldsTech Spinner - Negative Resist SPN-04 Resist Coating Ana Cohen
Apogee Spinner - E-Beam SPN-06 Resist Coating Ana Cohen
CEE Apogee Spinner - Negative Epoxy Resist SPN-08 Soft Lithography Ana Cohen
CEE Apogee Spinner - PDMS SPN-09 Soft Lithography Ana Cohen
Anatech SCE-106 Barrel Asher DE-07 Soft Lithography Ana Cohen
ABM3000HR Mask Aligner MA-03 Soft Lithography Ana Cohen
SCS PDS2010 Parylene Coater PVD-07 Soft Lithography Kyle Keenan
Silanization Dessicator PVD-08 Soft Lithography Ana Cohen
MRL Wet/Dry Thermal Oxide CVD-02 A Thermal Processing Lucas Barreto
MRL LPCVD Silicon Nitride CVD-02 B Thermal Processing Lucas Barreto
MRL Anneal 1 CVD-02 C Thermal Processing Lucas Barreto
MRL Anneal 2 CVD-02 D Thermal Processing Lucas Barreto
Rapid Thermal Annealer (RTA) - Si RTA-01 Thermal Processing Lucas Barreto
Rapid Thermal Annealer (RTA) - General RTA-02 Thermal Processing Lucas Barreto
Tousimis Critical Point Dryer CPD-01 Wet Processing Travis Venables
Spin Rinse Dryer SRD-01 Wet Processing Kyle Keenan
Hydrofluoric (HF) Acid Bench WB-06 Wet Processing Ana Cohen
Sonicator - Bay 3 WB-09 Wet Processing Kyle Keenan
Sonicator - Bay 2 WB-11 Wet Processing Kyle Keenan
RCA Clean Bench WB-14 Wet Processing Ana Cohen
Retrieved from "https://wiki.nano.upenn.edu/wiki/index.php?title=QNF_Equipment_Owner_Matrix&oldid=2293"