Difference between revisions of "QNF Equipment Owner Matrix"

From Quattrone Nanofabrication Facility
Jump to navigation Jump to search
(17 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
{| class="wikitable sortable"
 
{| class="wikitable sortable"
−
! Tool Name !! Tool ID !! Tool Group !! Process Owner
+
! Tool Name !! Tool ID !! Tool Group !! Owner
 
|-
 
|-
−
| EVG 510 Wafer Bonder || BE-01 || Backend || [[Eric_Johnston | Eric]]
+
| EVG 510 Wafer Bonder || BE-01 || Backend || [[Eric_Johnston | Eric Johnston]]
 
|-
 
|-
−
| EVG 620 Wafer Bond Aligner || BE-02 || Backend || Eric
+
| EVG 620 Wafer Bond Aligner || BE-02 || Backend || [[Eric_Johnston | Eric Johnston]]
 
|-
 
|-
−
| K&S Wire Bonder || BE-03 || Backend || Eric
+
| K&S Wire Bonder || BE-03 || Backend || [[Eric_Johnston | Eric Johnston]]
 
|-
 
|-
−
| ADT 7100 Dicing Saw || BE-04 || Backend || David J
+
| ADT 7100 Dicing Saw || BE-04 || Backend || [[Eric_Johnston | Eric Johnston]]
 
|-
 
|-
−
| MPT Corp. RTP-600S Rapid Thermal Annealer || BE-05 || Backend || David B
+
| MPT Corp. RTP-600S Rapid Thermal Annealer || BE-05 || Backend || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Tousimis Critical Point Dryer || CPD-01 || Backend || David J
+
| Tousimis Critical Point Dryer || CPD-01 || Backend || [[Kyle_Keenan | Kyle Keenan]]
 
|-
 
|-
−
| Dimatix ink-Jet Printer || INK-01 || Backend || TBA
+
| Cambridge Nanotech S200 ALD || ALD-01 || Deposition || [[Sam Azadi | Sam Azadi]]
−
|-
 
−
| Cambridge Nanotech S200 ALD || ALD-01 || Deposition || Sam
 
 
|-
 
|-
 
| Ultratech Fiji G2 ALD || ALD-02 || Deposition || Faculty Managed
 
| Ultratech Fiji G2 ALD || ALD-02 || Deposition || Faculty Managed
 
|-
 
|-
−
| Veeco Savannah 200 || ALD-03 || Deposition || Sam
+
| Veeco Savannah 200 || ALD-03 || Deposition || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
−
| Oxford PlasmaLab 100 PECVD || CVD-01 || Deposition || Sam
+
| Oxford PlasmaLab 100 PECVD || CVD-01 || Deposition || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
−
| MRL Wet/Dry Thermal Oxide || CVD-02 A || Deposition || Sam
+
| MRL Wet/Dry Thermal Oxide || CVD-02 A || Deposition || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
−
| MRL LPCVD Silicon Nitride || CVD-02 B || Deposition || Sam
+
| MRL LPCVD Silicon Nitride || CVD-02 B || Deposition || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
−
| MRL Anneal 1 || CVD-02 C || Deposition || Sam
+
| MRL Anneal 1 || CVD-02 C || Deposition || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
−
| MRL Anneal 2 || CVD-02 D || Deposition || Sam
+
| MRL Anneal 2 || CVD-02 D || Deposition || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
 
| SMI MOCVD, Horizontal Reactor || CVD-04 H || Deposition || Faculty Managed
 
| SMI MOCVD, Horizontal Reactor || CVD-04 H || Deposition || Faculty Managed
Line 36: Line 34:
 
| SMI MOCVD, Vertical Reactor || CVD-04 V || Deposition || Faculty Managed
 
| SMI MOCVD, Vertical Reactor || CVD-04 V || Deposition || Faculty Managed
 
|-
 
|-
−
| Lesker Nano-36 Thermal Evaporator || PVD-01 || Deposition || David B
+
| Lesker Nano-36 Thermal Evaporator || PVD-01 || Deposition || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Lesker PVD75 E-Beam/Thermal Evaporator || PVD-02 || Deposition || David B
+
| Lesker PVD75 E-Beam/Thermal Evaporator || PVD-02 || Deposition || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Lesker PVD75 DC/RF Sputterer || PVD-03 || Deposition || David J
+
| Lesker PVD75 DC/RF Sputterer || PVD-03 || Deposition || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Lesker PVD75 E-beam Evaporator || PVD-04 || Deposition || David J
+
| Lesker PVD75 E-beam Evaporator || PVD-04 || Deposition || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Denton Explorer14 Magnetron Sputterer || PVD-05 || Deposition || Sam
+
| Denton Explorer14 Magnetron Sputterer || PVD-05 || Deposition || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
 
| Evatec Clusterline 200 II || PVD-06 || Deposition || Faculty Managed
 
| Evatec Clusterline 200 II || PVD-06 || Deposition || Faculty Managed
 
|-
 
|-
−
| Anatech SCE-108 Barrel Asher || DE-02 || Dry Etch || Sam
+
| Anatech SCE-108 Barrel Asher || DE-02 || Dry Etch || [[Kyle Keenan | Kyle Keenan]]
−
|-
 
−
| SPTS Si DRIE || DE-03 || Dry Etch || Sam
 
 
|-
 
|-
−
| Oxford 80 Plus RIE || DE-04 || Dry Etch || Sam
+
| SPTS Si DRIE || DE-03 || Dry Etch || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
−
| Oxford Cobra ICP Etcher || DE-05 || Dry Etch || Sam
+
| Oxford 80 Plus RIE || DE-04 || Dry Etch || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
−
| SPTS/Xactix XeF2 Isotropic Etcher || DE-06 || Dry Etch || Sam
+
| Oxford Cobra ICP Etcher || DE-05 || Dry Etch || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
−
| Jupiter II RIE Plasma Etcher || DE-08 || Dry Etch || Sam
+
| SPTS/Xactix XeF2 Isotropic Etcher || DE-06 || Dry Etch || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
−
| Zeiss Smartzoom5 2D/3D Optical Microscope || MET-10 || Inspection || Eric
+
| Jupiter II RIE Plasma Etcher || DE-08 || Dry Etch || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
−
| Zeiss Axio Imager M2m Microscope (1 of 4) || MET-12 || Inspection || David J
+
| Zeiss Smartzoom5 2D/3D Optical Microscope || MET-10 || Inspection || [[Eric_Johnston | Eric Johnston]]
 
|-
 
|-
−
| Zeiss Axio Imager M2m Microscope (2 of 4) || MET-13 || Inspection || David J
+
| Zeiss Axio Imager M2m Microscope (1 of 4) || MET-12 || Inspection || [[Kyle Keenan | Kyle Keenan]]
 
|-
 
|-
−
| Zeiss Axio Imager M2m Microscope (3 of 4) || MET-14 || Inspection || David J
+
| Zeiss Axio Imager M2m Microscope (2 of 4) || MET-13 || Inspection || [[Kyle Keenan | Kyle Keenan]]
 
|-
 
|-
−
| Zeiss Axio Imager M2m Microscope (4 of 4) || MET-15 || Inspection || David J
+
| Zeiss Axio Imager M2m Microscope (3 of 4) || MET-14 || Inspection || [[Kyle Keenan | Kyle Keenan]]
 
|-
 
|-
−
| IPG IX-255 Excimer Laser Micromachining || LMM-01 || Laser Micromachining || Eric
+
| Zeiss Axio Imager M2m Microscope (4 of 4) || MET-15 || Inspection || [[Kyle Keenan | Kyle Keenan]]
 
|-
 
|-
−
| IPG IX280-DXF Green Laser Micromachining || LMM-02 || Laser Micromachining || Eric
+
| IPG IX-255 Excimer Laser Micromachining || LMM-01 || Laser Micromachining || [[Eric_Johnston | Eric Johnston]]
 
|-
 
|-
−
| Elionix ELS-7500EX E-Beam Lithography System || EBL-01 || Lithography || David B
+
| IPG IX280-DXF Green Laser Micromachining || LMM-02 || Laser Micromachining || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| Litho Workstation for BEAMER and TRACER || EBL-02 || Lithography || David B
+
| Elionix ELS-7500EX E-Beam Lithography System || EBL-01 || Lithography || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Heidelberg DWL 66+ Laser Writer || LW-01 || Lithography || David J
+
| Litho Workstation for BEAMER and TRACER || EBL-02 || Lithography || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Nanoscribe Photonic Professional GT || LW-02 || Lithography || David J
+
| Heidelberg DWL 66+ Laser Writer || LW-01 || Lithography || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| SUSS MicroTec MA6 Gen3 Mask Aligner || MA-01 || Lithography || David J
+
| Nanoscribe Photonic Professional GT || LW-02 || Lithography || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| Nanonex NX2600 Nanoimprint/Mask Aligner || MA-02 || Lithography || David B
+
| SUSS MicroTec MA6 Gen3 Mask Aligner || MA-01 || Lithography || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| Hawks/Genesis HMDS Vapor Prime Oven || OVN-01 || Lithography || David J
+
| Nanonex NX2600 Nanoimprint/Mask Aligner || MA-02 || Lithography || [[David_Barth | David Barth]]
 
|-
 
|-
−
| SUSS MicroTec AS8 AltaSpray || RC-01 || Lithography || David J
+
| Hawks/Genesis HMDS Vapor Prime Oven || OVN-01 || Lithography || [[Kyle Keenan | Kyle Keenan]]
 
|-
 
|-
−
| KLA Tencor P7 2D profilometer || MET-01 || Metrology || Sam
+
| SUSS MicroTec AS8 AltaSpray || RC-01 || Lithography || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| KLA Tencor P7 2D&3D/stress profilometer || MET-02 || Metrology || Sam
+
| KLA Tencor P7 2D profilometer || MET-01 || Metrology || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Filmetrics F50 (yellow light) || MET-03 || Metrology || Sam
+
| KLA Tencor P7 2D&3D/stress profilometer || MET-02 || Metrology || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Filmetrics F40 || MET-04 || Metrology || Sam
+
| Filmetrics F50 (yellow light) || MET-03 || Metrology || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Zygo NewView 7300 Optical Profilometer || MET-05 || Metrology || David B
+
| Filmetrics F40 || MET-04 || Metrology || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Woollam VAS Ellipsometer || MET-06 || Metrology || Eric
+
| Filmetrics Profilm3D Optical Profilometer || MET-05 || Metrology || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Jandel Multi Height Four Point Probe || MET-08 || Metrology || Sam
+
| Woollam V-VASE Ellipsometer || MET-06 || Metrology || [[Eric_Johnston | Eric Johnston]]
 
|-
 
|-
−
| Micromanipulator 4060 Probe Station || MET-09 || Metrology || TBA
+
| Jandel Multi Height Four Point Probe || MET-08 || Metrology || [[Sam Azadi | Sam Azadi]]
 
|-
 
|-
−
| Filmetrics F50 (white light) || MET-11 || Metrology || Sam
+
| Micromanipulator 4060 Probe Station || MET-09 || Metrology || [[David_Barth | David Barth]]
 
|-
 
|-
−
| Anatech SCE-106 Barrel Asher || DE-07 || Soft Lithography || Sam
+
| Filmetrics F50 (white light) || MET-11 || Metrology || [[David_Barth | David Barth]]
 
|-
 
|-
−
| ABM3000HR Mask Aligner || MA-03 || Soft Lithography || Eric
+
| Anatech SCE-106 Barrel Asher || DE-07 || Soft Lithography || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| SCS PDS2010 Parylene Coater || PVD-07 || Soft Lithography || Kyle
+
| ABM3000HR Mask Aligner || MA-03 || Soft Lithography || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| Silanization Dessicator || PVD-08 || Soft Lithography || Eric
+
| SCS PDS2010 Parylene Coater || PVD-07 || Soft Lithography || [[Kyle_Keenan | Kyle Keenan]]
 
|-
 
|-
−
| Spinner - SU-8/PDMS || SPN-07 || Soft Lithography || Eric
+
| Silanization Dessicator || PVD-08 || Soft Lithography || [[Eric_Johnston | Eric Johnston]]
 
|-
 
|-
−
| Spinner - Positive Resist (Left) - 4" Wafer Only || SPN-01 || Spinners || David J
+
| Brewer Spinner - SU-8/PDMS || SPN-07 || Soft Lithography || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| Spinner - Positive Resist (Right) - Small Piece Only || SPN-03 || Spinners || David J
+
| Apogee Spinner - Positive Resist (Left) - No LOR/PMGI/Polyimide || SPN-01 || Spinners || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| Spinner - Negative Resist (Left) || SPN-04 || Spinners || David J
+
| Apogee Spinner - Positive Resist (Right) || SPN-03 || Spinners || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| Spinner - Negative Resist (Right) || SPN-05 || Spinners || David J
+
| ReynoldsTech Spinner - Negative Resist || SPN-04 || Spinners || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| Spinner - E-Beam Resist Only || SPN-06 || Spinners || David J
+
| Apogee Spinner - E-Beam Resist Only - No LOR/PMGI/Polyimide || SPN-06 || Spinners || [[Ana Cohen | Ana Cohen]]
 
|-
 
|-
−
| Spin Rinse Dryer || SRD-01 || Wet Bench || Kyle
+
| Spin Rinse Dryer || SRD-01 || Wet Bench || [[Kyle_Keenan | Kyle Keenan]]
 
|-
 
|-
−
| Hydrofluoric (HF) Acid Process || WB-06 || Wet Bench || Eric
+
| Hydrofluoric (HF) Acid Process || WB-06 || Wet Bench || [[Ana Cohen | Ana Cohen]]
 
|}
 
|}

Revision as of 14:15, 3 January 2024

Tool Name Tool ID Tool Group Owner
EVG 510 Wafer Bonder BE-01 Backend Eric Johnston
EVG 620 Wafer Bond Aligner BE-02 Backend Eric Johnston
K&S Wire Bonder BE-03 Backend Eric Johnston
ADT 7100 Dicing Saw BE-04 Backend Eric Johnston
MPT Corp. RTP-600S Rapid Thermal Annealer BE-05 Backend David Barth
Tousimis Critical Point Dryer CPD-01 Backend Kyle Keenan
Cambridge Nanotech S200 ALD ALD-01 Deposition Sam Azadi
Ultratech Fiji G2 ALD ALD-02 Deposition Faculty Managed
Veeco Savannah 200 ALD-03 Deposition Sam Azadi
Oxford PlasmaLab 100 PECVD CVD-01 Deposition Sam Azadi
MRL Wet/Dry Thermal Oxide CVD-02 A Deposition Sam Azadi
MRL LPCVD Silicon Nitride CVD-02 B Deposition Sam Azadi
MRL Anneal 1 CVD-02 C Deposition Sam Azadi
MRL Anneal 2 CVD-02 D Deposition Sam Azadi
SMI MOCVD, Horizontal Reactor CVD-04 H Deposition Faculty Managed
SMI MOCVD, Vertical Reactor CVD-04 V Deposition Faculty Managed
Lesker Nano-36 Thermal Evaporator PVD-01 Deposition David Barth
Lesker PVD75 E-Beam/Thermal Evaporator PVD-02 Deposition David Barth
Lesker PVD75 DC/RF Sputterer PVD-03 Deposition David Barth
Lesker PVD75 E-beam Evaporator PVD-04 Deposition David Barth
Denton Explorer14 Magnetron Sputterer PVD-05 Deposition Sam Azadi
Evatec Clusterline 200 II PVD-06 Deposition Faculty Managed
Anatech SCE-108 Barrel Asher DE-02 Dry Etch Kyle Keenan
SPTS Si DRIE DE-03 Dry Etch Sam Azadi
Oxford 80 Plus RIE DE-04 Dry Etch Sam Azadi
Oxford Cobra ICP Etcher DE-05 Dry Etch Sam Azadi
SPTS/Xactix XeF2 Isotropic Etcher DE-06 Dry Etch Sam Azadi
Jupiter II RIE Plasma Etcher DE-08 Dry Etch Sam Azadi
Zeiss Smartzoom5 2D/3D Optical Microscope MET-10 Inspection Eric Johnston
Zeiss Axio Imager M2m Microscope (1 of 4) MET-12 Inspection Kyle Keenan
Zeiss Axio Imager M2m Microscope (2 of 4) MET-13 Inspection Kyle Keenan
Zeiss Axio Imager M2m Microscope (3 of 4) MET-14 Inspection Kyle Keenan
Zeiss Axio Imager M2m Microscope (4 of 4) MET-15 Inspection Kyle Keenan
IPG IX-255 Excimer Laser Micromachining LMM-01 Laser Micromachining Eric Johnston
IPG IX280-DXF Green Laser Micromachining LMM-02 Laser Micromachining Ana Cohen
Elionix ELS-7500EX E-Beam Lithography System EBL-01 Lithography David Barth
Litho Workstation for BEAMER and TRACER EBL-02 Lithography David Barth
Heidelberg DWL 66+ Laser Writer LW-01 Lithography Ana Cohen
Nanoscribe Photonic Professional GT LW-02 Lithography Ana Cohen
SUSS MicroTec MA6 Gen3 Mask Aligner MA-01 Lithography Ana Cohen
Nanonex NX2600 Nanoimprint/Mask Aligner MA-02 Lithography David Barth
Hawks/Genesis HMDS Vapor Prime Oven OVN-01 Lithography Kyle Keenan
SUSS MicroTec AS8 AltaSpray RC-01 Lithography Ana Cohen
KLA Tencor P7 2D profilometer MET-01 Metrology David Barth
KLA Tencor P7 2D&3D/stress profilometer MET-02 Metrology David Barth
Filmetrics F50 (yellow light) MET-03 Metrology David Barth
Filmetrics F40 MET-04 Metrology David Barth
Filmetrics Profilm3D Optical Profilometer MET-05 Metrology David Barth
Woollam V-VASE Ellipsometer MET-06 Metrology Eric Johnston
Jandel Multi Height Four Point Probe MET-08 Metrology Sam Azadi
Micromanipulator 4060 Probe Station MET-09 Metrology David Barth
Filmetrics F50 (white light) MET-11 Metrology David Barth
Anatech SCE-106 Barrel Asher DE-07 Soft Lithography Ana Cohen
ABM3000HR Mask Aligner MA-03 Soft Lithography Ana Cohen
SCS PDS2010 Parylene Coater PVD-07 Soft Lithography Kyle Keenan
Silanization Dessicator PVD-08 Soft Lithography Eric Johnston
Brewer Spinner - SU-8/PDMS SPN-07 Soft Lithography Ana Cohen
Apogee Spinner - Positive Resist (Left) - No LOR/PMGI/Polyimide SPN-01 Spinners Ana Cohen
Apogee Spinner - Positive Resist (Right) SPN-03 Spinners Ana Cohen
ReynoldsTech Spinner - Negative Resist SPN-04 Spinners Ana Cohen
Apogee Spinner - E-Beam Resist Only - No LOR/PMGI/Polyimide SPN-06 Spinners Ana Cohen
Spin Rinse Dryer SRD-01 Wet Bench Kyle Keenan
Hydrofluoric (HF) Acid Process WB-06 Wet Bench Ana Cohen
Retrieved from "https://wiki.nano.upenn.edu/wiki/index.php?title=QNF_Equipment_Owner_Matrix&oldid=1295"