Difference between revisions of "Lesker PVD75 E-Beam/Thermal Evaporator"
Jump to navigation
Jump to search
(Created page with "Category:Deposition {{EquipmentInfo | name = Lesker PVD75 E-Beam/Thermal Evaporator | Tool_Name = Lesker PVD75 E-Beam/Thermal Evaporator | image = Image:PVD-02.jpeg|300...") |
|||
| Line 22: | Line 22: | ||
| − | ===== | + | ===== Deposition Sources ===== |
* ADD MATERIALS HERE | * ADD MATERIALS HERE | ||
Revision as of 10:13, 29 March 2022
 |
|
| Tool Name | Lesker PVD75 E-Beam/Thermal Evaporator |
|---|---|
| Instrument Type | Deposition |
| Staff Manager | David Barth |
| Lab Location | Bay 2 |
| Tool Manufacturer | Kurt J. Lesker |
| Tool Model | PVD75 |
| NEMO Designation | {{{NEMO_Designation}}} |
| Lab Phone | XXXXX |
| SOP Link | SOP |
Description
The Kurt J. Lesker PVD 75 thin film deposition system is equipped for electron-beam (4 pockets) and thermal evaporation (2 sources). The evaporator is used to deposit metals and semiconductor materials. E-beam is the preferred evaporation technique for the high melting point materials. Evaporation provides directionality in depositions, which is beneficial when doing liftoff metallization (as opposed to conformal coating with sputtering deposition). Crystal oscillators are used to monitor deposition rates and thickness.
The system can accommodate pieces through wafers up to 150 mm in diameter and is configured with platen rotation and a cooling stage.
Deposition Sources
- ADD MATERIALS HERE