Difference between revisions of "Intlvac E-beam Evaporator"
Jump to navigation
Jump to search
Line 19: | Line 19: | ||
===== The tool ===== | ===== The tool ===== | ||
− | The IntlVac Electron Beam Evaporator has a base process chamber pressure in the e-8 Torr range with substrate heating and ozone purging capabilities. Deposition rates are monitored by an automated magazine of 6MHz crystals. The tool can be used to process a single 4 inch wafer at a time or a selection of small chips/pieces. | + | The IntlVac Electron Beam Evaporator has a base process chamber pressure in the low e-8 Torr range with substrate heating and ozone purging capabilities. Deposition rates are monitored by an automated magazine of 6MHz crystals. The tool can be used to process a single 4 inch wafer at a time or a selection of small chips/pieces. |
===== Available materials ===== | ===== Available materials ===== |
Revision as of 10:32, 11 September 2024
Tool Name | Intlvac E-Beam Evaporator |
---|---|
Instrument Type | Physical vapor deposition |
Staff Manager | David Barth |
Lab Location | Bay 2 |
Tool Manufacturer | Intlvac |
Tool Model | Nanochrome |
NEMO Designation | PVD-09 |
Lab Phone | 215-898-9748 |
SOP Link | SOP |
Description
The tool
The IntlVac Electron Beam Evaporator has a base process chamber pressure in the low e-8 Torr range with substrate heating and ozone purging capabilities. Deposition rates are monitored by an automated magazine of 6MHz crystals. The tool can be used to process a single 4 inch wafer at a time or a selection of small chips/pieces.
Available materials
The tool contains the following materials:
- Al - Aluminum
- Ti - Titanium