Difference between revisions of "Nanoscribe Photonic Professional GT"
Jump to navigation
Jump to search
(update to NEMO) |
|||
| Line 8: | Line 8: | ||
| Instrument_Type = Lithography | | Instrument_Type = Lithography | ||
| Staff_Manager = [[Ana Cohen | Ana Cohen]] | | Staff_Manager = [[Ana Cohen | Ana Cohen]] | ||
| − | | Lab_Location = Bay | + | | Lab_Location = Bay 6 |
| Tool_Manufacturer = Nanoscribe | | Tool_Manufacturer = Nanoscribe | ||
| Tool_Model = Photonic Professional GT | | Tool_Model = Photonic Professional GT | ||
Revision as of 15:29, 27 June 2024
 |
|
| Tool Name | Nanoscribe Photonic Professional GT |
|---|---|
| Instrument Type | Lithography |
| Staff Manager | Ana Cohen |
| Lab Location | Bay 6 |
| Tool Manufacturer | Nanoscribe |
| Tool Model | Photonic Professional GT |
| NEMO Designation | LW-02 |
| Nearest Phone | XXXXX |
| SOP Link | SOP |
Description
The Nanoscribe Photonic Professional is an easy-to-operate table-top laser lithography system that enables the fabrication of true three-dimensional nanostructures using commercially available photoresists. Designed for the fabrication of photonic crystal structures, the instrument is also ideal for, e.g., generating three-dimensional scaffolds for biology, micro- and nanofluidic circuitry.
Key Features
- Laser power: 50-150 mW, Wavelength: 780 nm, Pulse ~100 fs, Repetition rate: 80 MHz
- Available for Conventional 3D printing mode, Dip-in Liquid mode and air mode
- 3D printing with lateral resolution ~ 200 nm, vertical resolution ~ 300 nm
- High-precision Piezo scanning range: 300 x 300 x 300 μm3
- Motorized XY-scanning range: 100 x 100 mm2