Difference between revisions of "ADT 7100 Dicing Saw"
Jump to navigation
Jump to search
m (Changed protection level for "ADT 7100 Dicing Saw" ([Edit=Allow only autoconfirmed users] (indefinite) [Move=Allow only autoconfirmed users] (indefinite))) |
|||
| Line 28: | Line 28: | ||
ADT Contacts: | ADT Contacts: | ||
* Bob McCort (semi-retired): rmccort@adt-co.com | * Bob McCort (semi-retired): rmccort@adt-co.com | ||
| + | * Bob Smith, process specialist: rhsmith@adt-co.com | ||
===== SOPs & Troubleshooting ===== | ===== SOPs & Troubleshooting ===== | ||
Revision as of 15:20, 4 May 2022
 |
|
| Tool Name | ADT 7100 Dicing Saw |
|---|---|
| Instrument Type | Back End |
| Staff Manager | Eric Johnston |
| Lab Location | Singh 104 |
| Tool Manufacturer | Advanced Dicing Technologies (ADT) |
| Tool Model | 7122 |
| NEMO Designation | {{{NEMO_Designation}}} |
| Lab Phone | none |
| SOP Link | SOP |
Description
Workhorse dicing saw with precision dicing and alignment system. This is an automated tool with a 2″, DC-brushless, 1.2 kW, Front-mounted, Air-bearing Spindle (60 krpm Max.), with closed-loop turntable, and is optimized for multi-angle dicing of thin, tight tolerance products up to 200 mm x 200 mm.
Applications
- Dicing of Si wafers
- Dicing of glass wafers
- Dicing of sapphire wafers
Resources
ADT Contacts:
- Bob McCort (semi-retired): rmccort@adt-co.com
- Bob Smith, process specialist: rhsmith@adt-co.com
