Difference between revisions of "Intlvac E-beam Evaporator"
Jump to navigation
Jump to search
| Line 31: | Line 31: | ||
===== SOPs & Troubleshooting ===== | ===== SOPs & Troubleshooting ===== | ||
| − | Link: | + | Link: |
| − | |||
| − | |||
Revision as of 09:56, 30 August 2024
 |
|
| Tool Name | Intlvac E-Beam Evaporator |
|---|---|
| Instrument Type | Physical vapor deposition |
| Staff Manager | David Barth |
| Lab Location | Bay 2 |
| Tool Manufacturer | Intlvac |
| Tool Model | |
| NEMO Designation | PVD-09 |
| Lab Phone | 215-898-9748 |
| SOP Link | SOP |
Description
The tool
The IntlVac Electron Beam Evaporator has a base process chamber pressure in the e-8 Torr range with substrate heating and ozone purging capabilities. Deposition rates are monitored by an automated magazine of 6MHz crystals. The tool can be used to process a single 4 inch wafer at a time or a selection of small chips/pieces.
Available materials
The tool contains the following materials:
- Al - Aluminum
- Ti - Titanium
Resources
SOPs & Troubleshooting
Link: