Difference between revisions of "Spinner - Positive Resist (Left) - POLOS"
Jump to navigation
Jump to search
| Line 20: | Line 20: | ||
== Notes == | == Notes == | ||
| − | * | + | * Three standard chucks are available: |
| − | ** | + | **For 2-4" wafers, use the 2" chuck |
| − | * | + | **For wafers >5", use the 4" chuck |
| − | * | + | **For pieces, use the piece part adaptor on top of the 2" chuck |
| + | **A non-vacuum chuck and a foil chuck can be used for special applications. If you think you need these, please discuss with staff. | ||
| + | * An adjustable centering tool can be used to center wafers from 2" to 6" | ||
* Because of the closed bowl design, this spinner tends to give thinner coatings at the same speed compared with open bowl spinners. Please characterize your resists and make sure the thicknesses you get are appropriate for your process. | * Because of the closed bowl design, this spinner tends to give thinner coatings at the same speed compared with open bowl spinners. Please characterize your resists and make sure the thicknesses you get are appropriate for your process. | ||
* '''Do not use a foil liner in this spinner.''' The spinner has a plastic liner in place, and the liner, bowl, and lid should be wiped clean with acetone after every use. | * '''Do not use a foil liner in this spinner.''' The spinner has a plastic liner in place, and the liner, bowl, and lid should be wiped clean with acetone after every use. | ||
Revision as of 15:09, 8 February 2023
 |
|
| Tool Name | Polos Spinner |
|---|---|
| Instrument Type | Lithography |
| Staff Manager | David Jones |
| Lab Location | Bay 5 |
| Tool Manufacturer | SPS |
| Tool Model | Polos SPIN150i |
| NEMO Designation | {{{NEMO_Designation}}} |
| Lab Phone | XXXXX |
| SOP Link | SOP |
Description
The Polos SPIN150i is in place on a trial basis as QNF explores options for new spincoaters in the cleanroom. It has a closed bowl design, and can spin samples from piece parts to 6" wafers.
Notes
- Three standard chucks are available:
- For 2-4" wafers, use the 2" chuck
- For wafers >5", use the 4" chuck
- For pieces, use the piece part adaptor on top of the 2" chuck
- A non-vacuum chuck and a foil chuck can be used for special applications. If you think you need these, please discuss with staff.
- An adjustable centering tool can be used to center wafers from 2" to 6"
- Because of the closed bowl design, this spinner tends to give thinner coatings at the same speed compared with open bowl spinners. Please characterize your resists and make sure the thicknesses you get are appropriate for your process.
- Do not use a foil liner in this spinner. The spinner has a plastic liner in place, and the liner, bowl, and lid should be wiped clean with acetone after every use.